Interacting with a Kodiak-equipped driverless commercial motor vehicle
Kodiak's First Responder Interaction Plan provides first responders the information needed to safely interact with a Kodiak-equipped driverless commercial motor vehicle (CMV). Kodiak is committed to enhancing safety on our roadways, and this commitment extends to the first responders who keep those roadways safe. As we continue to scale our operations, we will share updates and opportunities for training.
First steps on scene
If you're responding to a stopped Kodiak-equipped CMV, follow these steps. The truck can be identified by the Kodiak-branded sensor pods mounted where the side mirrors would normally be.
Confirm the truck is stopped
When amber warning beacons are flashing, the vehicle is immobilized and the autonomy system cannot re-engage without authorization from our Command Center.
Approach from the passenger side
Use the truck as a barrier from active traffic. Remain near the passenger-side cab entrance during the interaction, or return to your vehicle with emergency lights on.
Call our Command Center
Our team is available 24/7 and can provide real-time vehicle data, document access, towing assistance, and step-by-step guidance to resolve the interaction.
Notify us when you're done
Upon completion, let the Command Center know — they'll provide instructions for releasing the vehicle.
Contacting the Kodiak Command Center
Have ready: Location, truck number (if visible), reason for contact, name, and agency and badge ID
Phone (Available 24/7)
View the full interaction plan (PDF)
The complete FRIP covers vehicle identification, emergency response, collision procedures, towing, and more. A physical copy is also in the document box on the rear passenger side of the cab.
Finding documents on the truck
If you need to access vehicle documents or manually immobilize the truck, here's where to find what you need. The Command Center can guide you through each step remotely.
The truck is immobilized when the amber warning beacons are flashing. If you need to manually disable it, open the box labeled "Clear to Launch Switch" on the driver's side of the cab and flip the switch to the OFF position. The autonomy system cannot re-engage without Command Center authorization.
